Tutorials/Audio recording/attaching mic to speaker

From Bjoern Hassler

Ideally you want to do this at least 15 minutes before the lecture starts. Connect the clip microphone to the speaker in a way so that the mic "comes cleanly off the clothes", i.e. such that the mic does not rub against the clothing. Make sure that there is not a name tag, long hair, or jewelry that "clunks" against the mic.

When putting the mic on the speaker the best place is on the tie. Otherwise on the lapel of a jacket, or onto the shirt. A third of the way down the shirt is a good position. Make sure that the mic clip is firmly attached but that the mic itself comes away from the clothing: sometimes (with movement) it can fall back against the clothing.

The transmitter that should be placed safely out of the way. Either the trouser pocket or belt are both good positions. If your speaker is well animated make sure the transmitter will not come loose. Make sure the antenna can hang freely, and is not about to be snapped off.

Ask your speaker to carry on talking, bearing in mind that they may speak more loudly during the talk. This allows you to listen through the headphones and watch the levels on both the receiver and recorder. Monitor the audio carefully and pay attention to any peaks in the sound. Be aware that if the speaker is going to be giving a lecture but they are speaking at a normal level before, they will adjust their own personal voice levels when it comes to the lecture.