Tutorials/Basic Edit in Soundtrack

From Bjoern Hassler's website
Jump to: navigation, search

This tutorial describes how to do a quick audio edit in Soundtrack Pro 2, part of Final Cut Studio 2 (Apple). You'd want to be familar with this e.g. for processing lecture recordings. When you are done with this, you can read Encoding mp3 with iTunes. Some more background is here: Dynamic Range Compression.

1 Opening and saving a wav file[edit]

Open Soundtrack Pro. The standard layout should look like this:

01 Standard layout.jpg


If not, then press F1 or choose Window > Layouts > Standard

02 how to get standard layout.png

Find a wav file you'd like to process. Ctrl-click and choose: Open in soundtrack

03 a wav file that came from the recorder.jpg

The file open in soundtrack looks like this:

04 wav file opened in soundtrack.jpg

Immediately do a 'save as', saving the file to a new name. Choose File type = Audio file project

05 do a save as 2.jpg


2 Processing the file[edit]

If your file is stereo, and you've only used one channel, the you should convert to mono. (Some solid state recorders can record mono files, which particularly for longer files is preferable, as it saves you the effort of converting to mono.)

So if you just need one channel, then the first step is to convert the file to mono. Select Process > Convert to Mono

06 convert to mono.jpg


In our example, we want the left channel:

07 conv to mono.jpg


Confirm by pressing ok. 08 conv to mono.jpg

3 Trimming[edit]

We now want to trim the start and end off the file. The recorder should have been running a while before the lecture started, so you need to trim some audio from the beginning.

09 result of convert to mono. mark bits not required at start.jpg


Also, the recoder would not have been switched off immediately after the event was over, so you need to trim something from the beginning.

10 mark bits not required at end.jpg


The result look like this.

11 result.jpg


You may want to insert a 'Fade in' at the start, and a 'Fade out' at the end.

4 Normalisation[edit]

The next step is to normalise the audio. Choose Process > Normalise (Apple-L)

12 normalise.jpg


Your file now looks like this:

13 result of normalisation.jpg


5 Dynamic Range Compression[edit]

To improve the audio level, you now need to apply dynamic range compression, background notes available here Dynamic Range Compression.

Play through various parts of your audio, observing the level meter. They typical level will be around -6 to -18dB. Remember this value.

14 now play to determine typical volume.jpg


Then choose Process > Dynamics > Compressor.

15 select compressor.jpg


The compressor looks like this:

16 apply compression.jpg

You choose the threshold to be the typical volume level you observed before. Make sure that auto gain is set to 0dB. Set the rate to 4:1. You can listen to to the effect by clicking the play button. When done, click apply.

Compressor now works through your file, and you should see a 'thickening' of the waveform.

17 result of compression.jpg

After the compression, the audio level should be higher than before, ideally above -6dB most of the time.

6 Export[edit]

You are now done! Export your file:

18 now save a copy.jpg

This time choose 'aiff file' or 'wave file'.

19 save as wav file 2.jpg